Dinamometri, Macchine, Strumenti e Sistemi per prove sui materiali e sui prodotti finiti

GF-51

Drill Chuck 4 mm (0.16 in)
This stainless steel Jacobs chuck grip holds samples securely during tension or compression testing. Maximum sample diameter is 4 mm (0. 16 in).

Capacity
100 N, 22.5 lbf

Packaging
Single grip only

Applications
Ideal for holding cylindrical samples up to 4 mm (0.16 in) during tension or compression testing.

Chuck Grips ( 55K)

GF-52

Drill Chuck 6 mm (0.23 in)
This stainless steel Jacobs chuck grip holds samples securely during tension of compression testing. Maximum sample diameter is 6 mm (0.23 in).

Capacity
100 N, 22.5 lbf

Packaging
Single grip only

Applications
Ideal for holding cylindrical samples up to 6 mm (0.23 in) during tension or compression testing.

Chuck Grips ( 55K)

TG153

Chuck Grips for Cement Samples
Profiled chuck grips are ideal for testing cement samples. Use for pre-formed cement bricks.

Capacity
10 kN, 2248 lbf

Packaging
Includes upper and lower grips.

Applications
Used for determining the tensile strength of cement mortar by casting and testing briquette samples. Test method is similar to that described in ASTM C190:1985 (Standard test method for tensile strength of hydraulic cement mortars).

Chuck & Collet Grips (92K)

TG16

Split Shoulder Profiled Chuck Grips
Ideal for testing metal dumbbell samples.

Two types of grips are available:

TG 16/B grips for metric B test specimens (B = 5.5 mm (0.22 in) parallel section)
TG 16/C grips for metric C test specimens (C = 7.5 mm (0.3 in) parallel section)

Capacity
20 kN, 4496 lbf

Packaging
Includes upper and lower grips.

Applications
Used for straining a metal dumbbell sample by tensile force, generally to fracture.

Standards Applicable
Test method is similar to that described in ISO 6892 (metallic materials - tensile testing) and BS 18:1987.

Chuck & Collet Grips (92K)

TG24

Metal Dumbbell and Plate Sample Chuck Grips
These grips are used for high tensile, flat plate, metal dumbbell samples. Samples must have clearance holes drilled in either end to accept the clamping disks. Clearance holes are 7.94 mm (0.31 in) in diameter. Maxiumum sample width is 35 mm (1.38 in). Maximum sample thickness 6 mm (0.23 in).

Capacity
20 KN, 4496 lbf

Packaging
Includes upper and lower grip.

Applications
Used for straining a metal dumbbell sample by tensile force, generally to fracture.

Chuck & Collet Grips (92K)

TG167

Collect Grip for Hollow Tubes and Bars
This grip features circular sliding, wedge-action and initial capstan tightening. Collet size should be specified to match the sample diameter. Collets are available in different diameters from 12 to 45 mm (0.47 to 1.77 in). Ideal for tube and bar stock.

Capacity
100 kN, 22481 bf

Packaging
Includes upper and lower grip. Collets must be ordered separately. A total of two collets are required in any combination depending on sample diameter. Can be fitted to upper and lower grip. Collets are sold individually.

Applications
Used for assessing tensile characteristics of hollow tubing and solid metal bars.

Chuck & Collet Grips (92K)