Dinamometri, Macchine, Strumenti e Sistemi per prove sui materiali e sui prodotti finiti

TG34

Vice Action Grip to Thin Film
This general purpose vice action grip is ideal for testing thin film samples. They feature an easy to use screw action and are fitted with flat, rubber-coated jaw faces. Maximum sample width is 25 mm (0.98 in). Maximum sample thickness 3 mm (0.12 in).

Capacity
500 N, 112.5 lbf

Packaging
Includes upper and lower grip.

Applications
Used for tensile testing of paper, rubber, thin plastic film, woven and non-woven textiles.

Vice Grips ( 109K)

GF-53

Miniature Tensile Grip
This general purpose tensile grip features jaw faces that are manually tightened to secure miniature specimens. The opening between the faces is 5 mm (0.2 in). The gripping length is 12 mm (0.47 in). A ball socket mounting screw in the upper grip assures correct alignment with the lower grip.

Capacity
125 N, 28.1 lbf

Packaging
Includes upper and lower grip.

Applications
Ideal for tensile testing of small components and miniature parts.

Vice Grips ( 109K)

TG33

Spring Loaded Tension Grip
These spring loaded, rubber faced tension grips are ideal for testing at very light loads. Maximum sample width is 25 mm (0.98 in). Maximum sample thickness 2 mm (0.08 in).

Capacity
5 N, 1.12 lbf

Packaging
Includes upper and lower grip.

Applications
Ideal for tensile testing of fine wire, plastic film etc.

Vice Grips ( 109K)

GF-12

Vice Action Grip for Miniature Components
This general purpose vice action grip is designed to tighten using moveable jaws. The jaw features a tapered nose, which is ideal for very small components or where space is limited. A front thumbscrew ensures quick installation and release of the specimen.

Capacity
150 N, 33.7 lbf

Packaging
Single grip only.

Applications
Ideal for tensile testing of small components and miniature parts.

Vice Grips ( 109K)

GF-1

Manually Tightened Tensile Grip
This general purpose tensile grip features jaw faces that are manually tightened to secure specimens from 6 mm (0.23 in) to 30 mm (1.18 in) in diameter. The gripping length is 45 mm (1.77 in). A ball socket mounting screw in the upper grip assures correct alignment with the lower grip. Grips have hardened steel serrated faces.

Capacity
1 kN, 225 lbf

Packaging
Includes upper and lower grip. The top and bottom grip may be order separately.

Applications
Ideal for tensile testing of small components, wire, yarn, thread, cord and miniature parts.

Vice Grips ( 109K)

TG26

Quick Release Vice Action Grip
This quick release general purpose, vice action grip is supplied with 100 x 50 mm (3.94 x 1.97 in) cross cut jaw faces for testing samples up to 100 mm (3.94 in) wide. A maximum sample width of 150 mm (5.91 in) is possible, when using appropriate optional jaw faces. Maximum sample thickness is 12 mm (0.5 in). Optional interchangeable corrugated, wide corrugated, plain and rubber jaw faces are available.

Capacity
1 kN, 225 lbf

Packaging
Includes upper and lower grip and 100 x 50 mm (3.94 x 1.97 in) cross cut jaw faces supplied as standard.

Applications
Used for tensile testing of paper, rubber, thin plastic film, woven and non-woven textiles.

Vice Grips ( 109K)

TG74

Adjustable, Rear Face Vice Grip
This vice action grip has fully adjustable faces to ensure correct alignment. The grip is supplied with 25 x 25 mm (0.98 x 0.98 in) plain jaw faces. Maximum sample width is 50 mm (1.97 in) when using appropriate optional jaw faces. Maximum sample thickness 20 mm (0.79 in). Optional interchangeable cross cut, plain and rubber jaw faces are also available.

Capacity
5 kN, 1124 lbf

Packaging
Includes upper and lower grip with 25 x 25 mm (0.98 x 0.98 in) plain jaw faces supplied as standard.

Applications
Used for tensile testing of paper, rubber, thin plastic film, woven and non-woven textiles and foils.

Vice Grips ( 109K)

TG300

Extra Pressure 5 kN (1124 lbf) Vice Grip
This vice action grip is supplied with an independent tightening tool for applying extra pressure. One grip face is corrugated, the other is serrated to prevent the specimen from slipping during the test. Maximum sample width is 55 mm (2.17 in). Maximum sample thickness 12 mm (0.47 in).

Capacity
5 kN, 1124 lbf

Packaging
Includes upper and lower grip.

Applications
Used for tensile testing of textiles and leather.

Vice Grips ( 109K)

TG310

Extra Pressure 10 kN (2248 lbf) Vice Grip
This vice action grip is supplied with an independent tightening tool for applying extra pressure. Both grip faces are serrated to prevent the sample from slipping during the test. Maxiumum sample width is 55 mm (2.17 in). Maximum sample thickness 12 mm (0.47 in).

Capacity
10 kN, 2248 lbf

Packaging
Includes upper and lower grip.

Applications
Used for tensile testing of textiles and leather.

Vice Grips ( 109K)

TG25

Heavy Duty Vice Grip
This vice action grip is ideal for heavy duty applications up to 20 kN (4496 lbf). The grip is supplied with 50 x 100 mm (1.97 x 3.94 in) cross cut jaw faces. Maximum sample width is 150 mm (5.91 in) when using appropriate optional jaw faces. Maximum sample thickness 12 mm (0.47 in). Optional interchangeable cross cut, corrugated, wide corrugated, plain and rubber jaw faces are also available.

Capacity
20 kN, 4496 lbf

Packaging
Includes upper and lower grip.

Applications
Used for tensile testing of heavy duty textiles, harnesses, webbing, belts, sheeting, cardboard, rubber, plastics metals and wood products.

Vice Grips ( 109K)

TG32

Lightweight Spring-Loaded Clamp Grip
This lightweight, spring-loaded grip has rubber faces and is ideal for very light force measurements. Maximum sample width is 5 mm (0.19 in). Maximum sample thickness 1 mm (0.04 in). Maximum sample diameter 1 mm (0.04 in)

Capacity
5 N, 1.12 lbf

Packaging
Includes upper and lower grips.

Applications
Used for tensile testing of fine wire, thread and fibres.

Vice Grips ( 109K)